Archive for the ‘Ford Products’ Category

Slide on and Bolt on Wheel Spacers

Clarkos Performance has a high quality Billet bolt on wheel spacers,  designed for Australian speedway cars. These have been tested and proven on the race track and used on most winning race cars.

the current and expending range at the moment consists of ..
- 19 mm slide on wheels spacers
- 25 mm slide on wheel spacers
(suit early holden EH, EJ, HT, HD, torana, Ford Falcone, Holden Commodore, HQ)
- 35 mm Bolt on wheel spacers
(suit Holden Commodore, HQ, Ford Falcone )
- 50 mm Bolt on wheel spacers
(suit Holden Commodore and Ford Falcone)
- 30 mm & 40 mm
( Daihatsu Charade)

For all your inquires / viewing of products all you have to do is simply

CLICK HERE

You have nothing to worry about as all orders are expressed posted with tracking number and the products have been tested on many speedway tracks Aussie wide

Here is a free You Tube video about the wheel spacers

A Solution to a long term problem

A special report in the spot light section in the totally speedway mag found that Clarko’s Performance now has hi rise rocker covers to suit the Ford 250 / 4.1 cross flow 6 cyl alloy and cast iron cyclinder heads, rather then adding a spacer to the EFI styles or having to cut up 2 steel rocker covers, why not just have a purpose made cast aluminium hi rise rocker rocker to suit the application?

Benefits – these are made to clear the rolla rockers
- the cover is supplied with both pcv and breather cap grommets
- has cast in cone style breather shrouds

To prevent oil leaks from rocker cover spacers and the time it takes to cut up 2 tin rocker covers to avoid the issue of the rolla rockers hitting, lets face it this is really a 1 stop solution solver.

Check out the Totally Speedway Product spot light December 2011

 

To find out more CLICK HERE

Ford 6cyl 4.1 Cross Flow hi rise engine Rocker Covers are now avaliable

Have tried to install a early model Alloy cross flow rocker cover and found that if you have rolla rockers they hit on the rocker cover?
try to use the polished steel rocker rocker covers you need 2 of them cut them in half and have to reweld so you can run your rolla rockers?

Well clarkos performance has had hands on experience and know exactly where you are coming from and understand the pain this can cause, so now we have made avaliable ford x flow 4.1 alloy rocker covers that are higher then standard that suit this application you need with no stress

Benefits of the new clarko hi rise rocker covers
- No fouling in the engine rocker cover to rolla rockers
- No risk of the rocker cover gasket leak ( compaired to the polish steel ones)
- We have  bolt on hassle free solution

These HI RISE Alloy engine rocker covers come in 2 basic designs, smooth top and ribbed top

So if you are wanting a real solution to a problem that has been a issue for many years all you have to do is click on the link below

CLICK HERE FOR MORE INFORMATION

How to lighten your Borg Warner diff gears

As many AMCA, modified production, super street cars are looking for that edge over there competitors, Many people are using mini spools, full spools, aliminium spools and all sorts of advantages to attain that edge,  Clarko has been able to help them by lightening diff gears, as seen on many ford 9 inch diff gears, Clarko is able to machine the Borg Warner diff gears.

Below Clarko from Clarkos Performance has attached a video AS SEEN ON YOU TUBE by himself the steps involved to machine Borg Warner diff gears

for more information CLICK HERE to contact clarko

Want to Know how to save $$$ and DYI yourself to rekit a Ford 6 saginam power steering pump?

Does your power steering pump leak oil?

I know exactly how you feel want to learn for FREE by a step by step video how you can rekit your Ford power steering pump.

Benefits on doing this yourself
- Save money
- Able to do from your own home
- Its so easy most DYI people could do it

Here is the FREE DIY video on how to replace the leaky seals

Now that you know how easy and simple it is do

I Guarantee you!  that installing this pulley you will reduce the RPM of the power steering pump
here are some other products you may be interested in,

Ford OHC Aluminium power steering pulley CLICK HERE
Ford x-flow Aluminium 3 bolt Reduction pulley  CLICK HERE
Ford x-flow Aluminium 4 bolt reduction pulley CLICK HERE

Speedway people wanting up get more out of your pump and over come the common problems that you experience?

HOW TO  modify your ford power steering pump in just a few minutes?

This book has been a best seller since it was launched

Grab your ebook NOW

A give away price at $5.95

BORG WARNER single rail manual transmission REPLACEMENT ALUMINIUM shifter nut

Require a replacement single rail shifter nut in Aluminium?
Very common in Speedway modified production, super streets and many other devisions as the old nyoln one tends strip or even fail leaving you with a gear stick not connected to the gear box.

These Shifter Nuts suit FORD FALCON XY XA XB XC XD XE XF in the BORG WARNER SINGLE RAIL MANUAL TRANSMISSION
Have you had a the same issue as others where the nylon shifter nut comes out of the gear box?

The Benefits on the aluminium shifter nuts
- Simple to replace
- Avoid having the gear stick come out as the nylon shifter nut appears to be a problem
- Have peace of mind you have reliability

These aluminium borg warner shifter nuts have been tested and proven in the road and race cars, and have been a real solution solver, you can install this yourself !!!
So the answer to your shifter problem is just a click away simple hit the order me now and have your shifter nut expressed posted to you

ORDER ME NOW

CLICK HERE to watch video how to install

For all email inquires click HERE

ULTRAFLOW MANIFOLD CLEVELAND 2V & 4V (4bbl)
Are you looking for the ultimate Ford manifold for your v8 Cleveland.
Then look no furthure, These ultrfaflow manifolds have been designed, dyno, tested and proven, can be used for road and race applications
THESE MANIFOLDS HAVE BEEN DESIGNED AND PROVEN FOR THE SERIOUS.
View brochure of Ultrafow Manifolds.
View more information about this product.

To PURCHASE your 4bbl ultraflow manifold CLICK HERE

ULTRAFLOW MANIFOLD CLEVELAND 2V & 4V (EFI)
Are you looking for the ultimate Ford EFI manifold for your v8 Cleveland.
Then look no furthure, These ultrfaflow manifolds have been designed, dyno, tested and proven, can be used for road and race applications
THESE MANIFOLDS HAVE BEEN DESIGNED AND PROVEN FOR THE SERIOUS.

NOTE – you recieve manifold, throttle body and tps
NO  injectors, fuel rail will be supplied

To PURCHASE your clevo EFI manifold CLICK HERE

For all email inquires click HERE

ULTRAFLOW MANIFOLD 250 FORD X-FLOW (2bbl)
Are you looking for the ultimate Ford intake manifold for your Ford 250 x-flow engine?
Then look no furthure, These ultrfaflow manifolds have been designed, dyno, tested and proven, can be used for road and race applications. Have been used on many speedway devision including super streets and more
THESE MANIFOLDS HAVE BEEN DESIGNED AND PROVEN FOR THE SERIOUS.
View more information this Ultraflow Manifold.
SHIPPING INSTRUCTIONS
Manifolds are shipped C.O.D. Via Australia post.
Clarko will contact you to confirm your orderand payment will be required at the post office when you collect your shipment.

For all email inquires click HERE

To PURCHASE your Ultraflow ford 250 manifold

CLICK HERE

AMAZING  Product solution Weld On Helmet Hook Eyes
Want to organise your race car better?
PLUS
stop yout helmet from getting scratched?
Being a race car driver myself i found it hard to avoid getting the helmet visor scratched and also when getting ready for racers was hard to fing your race gear in the dark in the pits
After scratching my viser from my helmet rolling around in the car made it hard to see plus i was always looking for my race gear, same as what most racers experience, so i decided to make some hooks to make life easier
by having these hooks
- able to hang up steering wheel
- able to hang up helmet
- able to find all my race gear
- now much more organisered
-simple to installalso check out this awsome video for more infomation
After using these weld on helmet hooks and being such a solution solver, other racers were saying where do you get them from ? even racers from all around Australia are now reaping the rewards of how these magical hooks are solving their problems, dont just take my word for it try it yourself  like what many other racers have done, so i decided to add them to my all ready growing list of parts that CLARKOS PERFORMANCE has
If you would like more information about this product or where you can purchase them click on the lick below

CLICK HERE FOR MORE INFORMATION

For all email inquires click HERE