Ford Underdrive 250 ford 6 cyl reduction pulley PLUS ebook how to modify power steering pump
June 30th, 2010 | 
Author: Clarkos Performance has both 3 bolt and 4 bolt aluminum billet Reduction pulleys avaliable
Have you wanted a quick and long term solution for your FORD 250 x -flow engine?
Have you ever had 1 or many of these similar problems?
- Over reving the power steering pump
- Blow powersteering oil out everywear
- Over heating the powersteering oil
- Powersteering go heavy
- Or just have issues in general with the power steering pump in a race application?
Well as a racer i know where you are coming from, you dont win racers from the infield, missing out on doing laps on the race track, missing out on the win due to a mechanical problem in the powersteering, and the list of issues goes on ……..
Because Clarko takes the time listens to the racer and finds the solution to your problems and then tests his products on racer cars so he can give you the solution to what you need this is how we have came up with the reduction pulleys for the 250 Ford x-flow 3 and 4 bolt set ups.
CLICK HERE FOR 3 BOLT PULLEY
- Avaliable in 3 and 4 bolt
- Slow down the RPM of your power steering
- Slow down the water pump RPM
- Slow down the alt RPM
- Easy to fit
These Reduction Pulleys can be found all throught out Australia and also in some parts of New Zealand, just dont my word for this magical problem solver try one NOW and experience the proof 1st hand on the success of the underdriven pulley suit ford 250 ford x-flow engineWant to know how to modify your power steering pump in just a few minutes?
This book has been a best seller since it was launched
Posted in Ford Products | 
Tags: aluminum pulley, power steering pulley, pulley water pump, pulleys, reduction pulley, underdrive pulley, v-belt pulley | 
3 Comments »
Holley Air Bleeds – By Clarkos Performance
HOLLEY AIR BLEEDS – By Clarkos Performance
Clarkos Performance has a variety of Holley parts and also does the methanol Holley carburetors, manily for 2bbl Holleys in the speedway world.
These brass Holley adjustable airbleeds are great for Holley tuning and Holley performance gains. Fantastic for Holley air fuel mixture adjustments when on methanol
Can be used in
– 750 Holley
– Holley 350
- Holley dominator
- Just about any Holley
Clarko has the gear and the tools to be able to install
Once you remove the Holley aircleaner you then can see these adjustable air bleeds, they tuck in nicely to the Holley choke tower
For more info about this product
CLICK HERE
For all email inquires click HERE
Tweet50mm / 2 inch Aluminium bolt on wheel spacers
50mm / 2 inch Aluminium Bolt on wheel spacers
Are you looking to space out the wheels on your speedway car?
Clarko now has 50mm / 2 inch wide bolt on wheel spacers to solve that problem!!
Rather then have many spacers, and extra long studs, which can and has lead to failure when racing, Clarko now has 50mm / 2 inch wide bolt on wheel spacers.
Benefits
- very easy to install (please watch video below)
- made from solid billet aluminium for strength
- have shipped straight to your front door for convenience
These spacers are avaliable in
- Ford 5 stud to Ford 5 stud
- Commodore to Commodore
Wheel stud information
Wheel studs are not provided, click on the link below for stud info
For Ford click here
For Holden Click here
or you can use ARP Part # 100-7703 but you will need to drill out the holes to suit the knurl
I Guarantee you! That installing this bolt on wheel spacer will offset your wheel and solve that problem you have
To view OR order your 50mm / 2 inch bolt on wheel spacers and other bolt on wheels spacers
CLICK HERE
How to install the bolt on wheel spacers ?
Contact web www.clarkosperformance.com
For all email inquires click HERE
Tweet
Posted in AMCA Products, Ford Products, Holden 6 |
Tags: bolt on wheel spacers, wheel spacers |
2 Comments »
HOLDEN Race Fans Steven Conway with race cam at Brisbane Speedway
Steve Conway testing out his 18 year old LJ Holden Torana at Brisbane Speedway
Steve uses some of Clarkos Performance race gear, like Beadlocks, weld of fittings, pushlock fittings, and some other parts, to view Clarkos Performance parts
CLICK HERE
Why are Sprint Car racers wanting THE LIGHTEST Wingless crank adapters
Wingless Sprint car CRANK ADAPTURE (Lightest in Australia)
Australias Lightest sprint car crank adapture has been designed/ tested/ proven to give, you, the racer the advantage on your competators and a no hassle instulation.
I personaly have bolted up and used the other crank adaptures on the market, so i do know first hand what you are experiening. Trying to do up those nuts with no room to swing that spanner, having to do them up in a pattern so as the nuts dont bottom out on the back of the adapture, taking forever to fit the dam adapture, and taking bark off your fingers in the mean time, plus i have seen realy life cases of where other adptures have come loose simply because you couldn’ tighten up the bolts properly, so i know exactly what expierences you are having, as from being there and experiencing it myself.
Because i have seen and experienced the pain, frustration and some results that you have had with some crank adaptures, Clarko and a well know wingless sprint car racer decided enough was enough and decided to upgrade this wingless crank adapture, This wingless sprint car racer uses Clarkos crank adapture on all the engines he recos and sends around Australia,
Why Clarkos adapture?
- Have the lighest crank adapture on the Aussie & New Zealand Market
- Use socket head cap screws and have access for a inhex socket so you can torgue up the bolts
- Able to install in minutes
- No more frustration when installing
- The first production run were sold in hours of being avaliable
- Have market confedience
Now that you know the Clarkos wingless sprint crank adapture is avalaible with all these extra features, Designed, tested, race proven, and can be found on race winning wingless sprint cars throught Australia and now haveing that extra advantage on your competators of being the lighest on the market with all the problems now eliminated, and being snaped up with in hours of being avaliable in the market place,
Why were Clarkos Sprint car wingless CRANK ADAPTURES almost sold out in just hours of being avaliable?
Clarko also has a range on Wingless Sprint race parts
- Methanol Injectors
- Crank adapters
- Engine mounts
- Aluminum Pulleys
- Steering wheels
- Power steering brackets
- coil mount
- top flange for throttle body
- Aluminum ans steel sumps
and a whole lot more
CLICK HERE TO VIEW OTHER WINGLESS PRODUCTS
For all email inquires click HERE
Tweet
Posted in Clarkos Performance, Wingless sprint car Products |
Tags: crank adapter, sprint car, sprint cars, wingless sprint |
1 Comment »
Bolt on wheel spacers 35mm & 50mm
Clarko just wants to inform you that we NOW have a exciting new product on the market, that you, the racer have been asking for by phone, email, or in chat. However, I am letting you know that the 50mm bolt on wheel spacers are now avaliable!!!, They are avaliable in
- Ford 5 stud
- Holden Commodore
50 mm Wheel Spacers
- Great for off setting the wheel for speedway cars
- Made from Billet Light weight T6 Aluminum
- Has a spiggot to locate the rim on the front
- Has a spiggot on the back side to go over axle
- I myself have tested and proven this product
- To read more about this product and wheel studs part numbers
suit
- Holden Commodore
- Ford 5 stud
- Holden HQ
- Difference on the 35mm and 50mm
- How they look on the car
- How to fit to the car
For all email inquires click HERE
FOR YOUR GENEROUS SUPPORT 09/10 SEASON
- Engineering equipmet
- Measuring equipment
- Engineering consumables
Or anything to do with the Engineering world feel free to contact MILLERS TOOLING
Clarkos Performance uses Millers Tooling in all our manufacturing processes, as they deliver hi quality and fantasic price, use the equipment they race winners use !!!
email – sales@clarkosperformance.com
web www.clarkosperformance.com
feel free to check out my web site, email me if you have any questions, requiring products that cant by else where any feed back would be great and feel free to purchase on line
Thanks Clarko
Posted in AMCA Products, Bolt on wheel spacers, Clarkos Performance, Ford Products, Holden 6 |
Tags: bolt on wheels spacers, wheel spacers |
3 Comments »
35 & 50mm Wheel Spacers Adapters Bolt on – Clarkos Performance
Clarko is pleased to announce the 50mm and 35mm bolt on wheel spacer are now avaliable, You the racers have requested them so Clarkos delivers
What bolt patterns / pcd wheel are avaliable ?
50mm wide – HQ, Ford, Holden Commodore
35mm wide – HQ, Ford, Holden commodore
What wheel studs do i use ?
All the information for wheel stauds can be viewed on the web site
click here for wheel stud information / click on the wheel spacer you require
BENFITS OF THESE BOLT ON WHEEL SPACERS
- Able to push out the wheels for better handling
- Not rub inside of the guards
- Great for car scaling and handling
- Use the race gear/ wheel spacers that the race winners are using
For more information about the Bolt on wheel spacers , wheel studs, wheel adapters how to purchase and more
click on the following link
CLICK HERE MORE IMFORMATION
TweetFord & Holden Commodore 50mm Bolt on wheel spacers avaliable at Clarkos
Clarko is pleased to announce the 50mm and 35mm bolt on wheel spacer are now avaliable, You the racers have requested them so Clarkos delivers
What bolt patterns / pcd wheel are avaliable ?
50mm wide – HQ, Ford, Holden Commodore
35mm wide – HQ, Ford, Holden commodore
What wheel studs do i use ?
All the information for wheel stauds can be viewed on the web site
click here for wheel stud information / click on the wheel spacer you require
BENFITS OF THESE BOLT ON WHEEL SPACERS
- Able to push out the wheels for better handling
- Not rub inside of the guards
- Great for car scaling and handling
- Use the race gear/ wheel spacers that the race winners are using
For more information about the Bolt on wheel spacers , wheel studs, wheel adapters how to purchase and more
click on the following link
CLICK HERE MORE IMFORMATION
Tweet35mm Bolt on Ford & Holden commodore wheel spacers now avaliable – Clarkos Performance
Clarko is pleased to announce the 50mm and 35mm bolt on wheel spacer are now avaliable, You the racers have requested them so Clarkos delivers
What bolt patterns / pcd wheel are avaliable ?
50mm wide – HQ, Ford, Holden Commodore
35mm wide – HQ, Ford, Holden commodore
What wheel studs do i use ?
All the information for wheel stauds can be viewed on the web site
click here for wheel stud information / click on the wheel spacer you require
BENFITS OF THESE BOLT ON WHEEL SPACERS
- Able to push out the wheels for better handling
- Not rub inside of the guards
- Great for car scaling and handling
- Use the race gear/ wheel spacers that the race winners are using
For more information about the Bolt on wheel spacers , wheel studs, wheel adapters how to purchase and more
click on the following link
CLICK HERE MORE IMFORMATION
Tweet50mm Bolt on Wheel Spacers now avaliable – Clarkos Performance
Clarko is pleased to announce the the 50mm bolt on wheel spacer is now avaliable, You the racers have requested them so Clarkos delivers
What bolt patterns / pcd wheel are avaliable ?
50mm wide – HQ, Ford, Holden Commodore
35mm wide – HQ, Ford, Holden commodore
What wheel studs do i use ?
All the information for wheel stauds can be viewed on the web site
click here for wheel stud information / click on the wheel spacer you require
BENFITS OF THESE BOLT ON WHEEL SPACERS
- Able to push out the wheels for better handling
- Not rub inside of the guards
- Great for car scaling and handling
- Use the race gear/ wheel spacers that the race winners are using
For more information about the Bolt on wheel spacers , wheel studs, wheel adapters how to purchase and more
click on the following link
CLICK HERE MORE IMFORMATION
Tweet
